RIMWORLD环世界
03 / RIMWORLDAETHERLOOP · 穹环

From tower rust\nto Aetherloop.

We started with rust on tower exteriors and narrowed the project to inspection, rust removal and coating maintenance. This page explains how the concept developed, what has been modelled and what we plan to examine next.

BEHIND THE DESIGN

From observing rust to designing the ring.

Where it began

“My hometown is Zhangjiakou, Hebei. On the road to Zhangbei, wind towers stand on the hills beside the highway. As a child, I watched them through the car window and wondered how they had been built. After leaving the highway, we would also see long white blades being carried on trailers.

One day I walked up to a tower near home. It was much taller than it looked from a distance, and the surface was not spotless. There were small cracks in the coating and patches of rust. When I touched it, reddish-brown rust came away on my hand. A local shepherd said people occasionally came to inspect it. That was the first time I thought about the care a tower needs after it has been built.”

A team member’s recollection

Defining the maintenance system

Our first question was straightforward: once equipment finds rust, can it bring the sanding and cleaning tools to that spot? Inspection alone still leaves another visit to arrange for treatment.

We brought inspection, rust removal, cleaning and painting into one system, with task robots for the different jobs. A shared circular track lets these different tools reach the same part of the exterior.

Designing the ring and track

Our mechanical design separates support from movement. The inner ring connects to the suspension ropes and supports the assembly. The outer ring provides a track around the tower, allowing the task robots to reach different sides of the exterior.

The gear assemblies accommodate ring rotation and independent robot travel. Suspension points sit on the inner ring to keep ropes clear of robots moving around the outer track. The two CAD views show this arrangement.

Prototype build and functional testing

Next we plan to build ring and track samples to check gear engagement and robot travel. Lifting tests will examine coordination between the four ropes and whether the carrier stays steady after stopping.

Once the structure runs steadily, we will add the inspection, sanding and spraying modules to examine rust identification, rust removal and spray coverage. Photographs and records from each test will let us compare results before and after design changes.

RIMWORLD / AETHERLOOPMeet the team behind it
DEVELOPMENT ROADMAP

Where Aetherloop goes next.

The next phase focuses on motion, treatment results and site use.

MOTION CONTROL

More stable positioning

Check coordinated travel of the four ropes and observe carrier tilt during lifting. Then test stops at selected heights and angular positions, record repeat-position errors and examine rope routing during rotation.

INSPECTION & TREATMENT

Reduce missed areas

Future tests will compare inspection findings with the areas actually treated. We will check sanding edges for remaining rust and spray coverage for gaps or build-up, then adjust tool position and travel speed accordingly.

FIELD DEPLOYMENT

Quicker installation and retrieval

We will also record how the equipment reaches the tower, how the suspension ropes are connected and how it is retrieved after a job. Repeated assembly trials will identify slow or error-prone steps and help simplify site operations.